{"id":1375,"date":"2019-05-16T09:28:18","date_gmt":"2019-05-16T09:28:18","guid":{"rendered":"https:\/\/www.akademiautomasi.com\/?p=1375"},"modified":"2019-05-16T09:28:18","modified_gmt":"2019-05-16T09:28:18","slug":"koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc","status":"publish","type":"post","link":"https:\/\/www.akademiautomasi.com\/?p=1375","title":{"rendered":"Koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Dalam posting ini saya ingin menjelaskan koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC (dengan bantuan KepServerEx). Hampir 7 tahun yang lalu saya menulis <a href=\\\"https:\/\/learnautomation.wordpress.com\/2012\/07\/04\/koneksi-wonderware-intouch-ke-plc-siemens-s7-200-via-opc\/\\\" target=\\\"_blank\\\" rel=\\\"noopener\\\">posting serupa<\/a> untuk PLC Siemens S7 200. Saat itu sebagai OPC client digunakan produk \\&#8221;OPC Link\\&#8221; yang saat ini sudah digantikan oleh \\&#8221;Factory Suite Gateway\\&#8221;.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Berikut ini video yang menampilkan bagaimana mengubah status I\/O fisik di PLC Siemens S7 1200 dapat ditampilkan pada Wonderware InTouch dengan protokol OPC.<\/p>\n\n\n\n<figure class=\\\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\\\"><div class=\\\"wp-block-embed__wrapper\\\">\n<iframe loading=\"lazy\" title=\"Koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC\" width=\"1200\" height=\"675\" src=\"https:\/\/www.youtube.com\/embed\/oBKZhoPuiKo?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Untuk mengkomunikasikan InTouch dan S7 1200 dengan protokol OPC, diperlukan OPC server (KepServerEx) dan OPC Client (FS Gateway). OPC Server bertugas untuk mengumpulkan data dari <em>hardware <\/em>PLC dan mengubahnya dalam format OPC. Sedang OPC Client bertugas untuk membaca data dari OPC server tersebut dan mengirimkannya ke HMI (InTouch). Berikut ini beberapa pengaturan yang perlu dilakukan. Diagram hubungan lengkap antar <em>software<\/em> dan <em>hardware <\/em>dapat dilihat di bawah.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter is-resized\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/diagram-intouch-siemens\/\\\" rel=\\\"attachment wp-att-1376\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/diagram-intouch-siemens.png\\\" alt=\\\"\\\" class=\\\"wp-image-1376\\\" style=\\\"width:243px;height:auto\\\" \/><\/a><\/figure>\n\n\n\n<!--more-->\n\n\n\n<h4 class=\"\\&quot;wp-block-heading\\&quot; wp-block-heading\">Pengaturan pada KepServerEx<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Pada KepServerEx, buatlah <em>channel&nbsp;<\/em>baru (misalnya \\&#8221;ChannelSiemens\\&#8221;) dan <em>device&nbsp;<\/em>baru (misalnya \\&#8221;PLC\\&#8221;).<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture1-2\/\\\" rel=\\\"attachment wp-att-1377\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture1-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1377\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Pada device \\&#8221;PLC\\&#8221;, yang perlu diatur ialah pilihan \\&#8221;Driver\\&#8221;: Siemens TCP\/IP Ethernet. Kemudian pilih \\&#8221;Model: S7-1200\\&#8221;. Pada bagian\\&#8221;ID\\&#8221; masukkan IP address PLC anda (default: 192.168.0.1).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Jika anda tidak memiliki PLC fisik, simulasi bisa dilakukan dengan memilih pilihan \\&#8221;Simulated: Yes\\&#8221;. Jika anda terhubung dengan PLC, jangan lupa mengubah mode menjadi \\&#8221;Simulated: No\\&#8221;. Cara simulasi sama dengan apa yang saya jelaskan di posting <a href=\\\"https:\/\/learnautomation.wordpress.com\/2012\/07\/04\/koneksi-wonderware-intouch-ke-plc-siemens-s7-200-via-opc\/\\\" target=\\\"_blank\\\" rel=\\\"noopener\\\">sebelumnya<\/a>.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture3\/\\\" rel=\\\"attachment wp-att-1379\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture3.png\\\" alt=\\\"\\\" class=\\\"wp-image-1379\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Selain itu, yang perlu diperhatikan ialah bagian \\&#8221;S7 Comm. Parameters\\&#8221; khususnya di bagian penomoran \\&#8221;CPU Rack\\&#8221; dan \\&#8221;CPU Slot\\&#8221;. Defaultnya ialah 0 dan 1, namun bisa berubah jika setting anda di TIA Portal berbeda.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture4-3\/\\\" rel=\\\"attachment wp-att-1399\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture4-2.png\\\" alt=\\\"\\\" class=\\\"wp-image-1399\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Setelah membuat <em>channel&nbsp;<\/em>dan&nbsp;<em>device<\/em>, kita perlu membuat&nbsp;<em>tag<\/em>. Nama&nbsp;<em>tag&nbsp;<\/em>bebas, namun untuk pengalamatan (\\&#8221;Address\\&#8221;) harus sesuai dengan aturan penamaan dari KepServerEx. Misalkan untuk input diskrit: I00.1, untuk output diskrit: Q00.1.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture5\/\\\" rel=\\\"attachment wp-att-1381\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture5.png\\\" alt=\\\"\\\" class=\\\"wp-image-1381\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">KepServerEx memberikan bantuan, jika anda menekan bagian paling kanan pada bagian&nbsp;<em>address<\/em>, akan muncul&nbsp;<em>hint&nbsp;<\/em>berikut.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture6-2\/\\\" rel=\\\"attachment wp-att-1382\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture6-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1382\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<h4 class=\"\\&quot;wp-block-heading\\&quot; wp-block-heading\">Pengaturan pada SMC<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Pengaturan FS Gateway dilakukan melalui SMC (System Management Console). Sebelumnya, pastikan anda sudah menginstall FS Gateway, dan dapat melihatnya di bawah \\&#8221;DA Server Manager\\&#8221; di SMC.&nbsp; Jalankan SMC dan halaman berikut akan muncul.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture7-2\/\\\" rel=\\\"attachment wp-att-1383\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture7-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1383\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Klik kanan pada \\&#8221;Configuration\\&#8221;, pilih \\&#8221;Add OPC Object\\&#8221;.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture8-2\/\\\" rel=\\\"attachment wp-att-1384\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture8-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1384\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture9-2\/\\\" rel=\\\"attachment wp-att-1385\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture9-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1385\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Pada OPC,atur \\&#8221;OPC Parameters\\&#8221; berikut,&nbsp; atur \\&#8221;Server&nbsp; Name: <strong>KEPWARE.KEPSERVEREX.V6<\/strong>\\&#8221;.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Klik kanan pada \\&#8221;OPC\\&#8221; dan pilih \\&#8221;AddOPCGroupObject\\&#8221;.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture10-2\/\\\" rel=\\\"attachment wp-att-1386\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture10-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1386\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Beri \\&#8221;Device Group Name\\&#8221; dengan aturan \\&#8221;<strong>OPCObject_OPCGroupObject<\/strong>\\&#8221; (misalkan \\&#8221;OPC_DeviceGroup\\&#8221;). Kemudian isikan \\&#8221;OPC Item ID Prefix\\&#8221; dengan aturan: \\&#8221;<strong>Channel.Device.<\/strong>\\&#8221;: \\&#8221;ChannelSiemens.PLC.\\&#8221;.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture11-2\/\\\" rel=\\\"attachment wp-att-1387\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture11-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1387\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Pada bagian \\&#8221;Device Items\\&#8221; berikan nama&nbsp;<em>item <\/em>(bebas) dan&nbsp;<em>item reference&nbsp;<\/em>(sesuai nama <em>tag<\/em> di KepServerEx).<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture13-2\/\\\" rel=\\\"attachment wp-att-1388\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture13-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1388\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Setelah melakukan konfigurasi, aktifkan FS Gateway dengan melakukan klik kanan dan pilih \\&#8221;Activate Server\\&#8221;.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture14-2\/\\\" rel=\\\"attachment wp-att-1389\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture14-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1389\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<h4 class=\"\\&quot;wp-block-heading\\&quot; wp-block-heading\">Pengaturan pada Wonderware InTouch<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Buatlah halaman dengan obyek &#8211; obyek berikut pada Wonderware InTouch. 2 buah lingkaran digunakan sebagai indikator input diskrit (alamat %I0.0 dan %I0.1), 2 buah persegi panjang digunakan sebagai indikator output diskrit (alamat %Q0.0 dan %Q0.1), dan <em>slider<\/em> digunakan sebagai indikator input analog (alamat %IW64).<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture15-3\/\\\" rel=\\\"attachment wp-att-1390\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture15-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1390\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Untuk pengaturan&nbsp;<em>tag name<\/em> dipilih tipe I\/O, kemudian&nbsp;<em>access name<\/em> dan&nbsp;<em>item&nbsp;<\/em>harus dikonfigurasi.&nbsp;<em>Item<\/em> disesuaikan dengan&nbsp;<em>item name<\/em> di FS Gateway. Berikut ini contoh konfigurasi untuk I\/O diskrit.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture16-2\/\\\" rel=\\\"attachment wp-att-1391\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture16-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1391\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Sedang berikut ini contoh konfigurasi untuk I\/O analog.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture18\/\\\" rel=\\\"attachment wp-att-1393\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture18.png\\\" alt=\\\"\\\" class=\\\"wp-image-1393\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture17-2\/\\\" rel=\\\"attachment wp-att-1392\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture17-1.png\\\" alt=\\\"\\\" class=\\\"wp-image-1392\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Untuk&nbsp;<em>access name<\/em> boleh dinamai apa saja.&nbsp;<em>Node name<\/em> dikosongkan karena dilakukan pada 1 komputer.&nbsp;<em>Application name<\/em> harus diberikan \\&#8221;FSGateway\\&#8221; dan&nbsp;<em>topic name<\/em> diberikan \\&#8221;OPCObject_OPCGroupObject\\&#8221; (misalkan \\&#8221;OPC_DeviceGroup\\&#8221;).<\/p>\n\n\n\n<h4 class=\"\\&quot;wp-block-heading\\&quot; wp-block-heading\">Running<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">Setelah semua konfigurasi benar, maka kita jalankan WindowViewer untuk melihat hasilnya.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture20\/\\\" rel=\\\"attachment wp-att-1395\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture20.png\\\" alt=\\\"\\\" class=\\\"wp-image-1395\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Untuk mengecek status DeviceGroup dan status masing &#8211; masing I\/O bisa dilakukan melalui bagian \\&#8221;Diagnostics\\&#8221; pada SMC berikut.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture19\/\\\" rel=\\\"attachment wp-att-1394\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture19.png\\\" alt=\\\"\\\" class=\\\"wp-image-1394\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Kita juga bisa membuka OPC Quick Client dari KepServerEx untuk melihat status masing &#8211; masing&nbsp;<em>tag<\/em> sebagai berikut.<\/p>\n\n\n\n<figure class=\\\"wp-block-image aligncenter\\\"><a href=\\\"https:\/\/learnautomation.wordpress.com\/2019\/05\/16\/koneksi-wonderware-intouch-dengan-plc-siemens-s7-1200-via-opc\/capture21\/\\\" rel=\\\"attachment wp-att-1396\\\"><img src=\\\"https:\/\/learnautomation.wordpress.com\/wp-content\/uploads\/2019\/05\/capture21.png\\\" alt=\\\"\\\" class=\\\"wp-image-1396\\\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Semoga bermanfaat!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Catatan tambahan:<\/p>\n\n\n\n<ul class=\"\\&quot;wp-block-list\\&quot; wp-block-list\">\n<li>Saat mengadakan perubahan di SMC, jangan lupa melakukan\u00a0<em>save changes<\/em>, jika tidak perubahan tidak akan tersimpan.<\/li>\n\n\n\n<li>Saat mengadakan perubahan di SMC atau KepServer, matikan WindowViewer, kemudian nyalakan lagi.<\/li>\n\n\n\n<li>Ada kalanya DA Server di SMC perlu di-<em>deactivate<\/em> lalu di-<em>activate\u00a0<\/em>lagi.<\/li>\n\n\n\n<li>\\&#8221;KepServerEx\\&#8221; dapat terus berjalan di <em>background <\/em>meski software sudah dimatikan. Hal ini dapat membuat Anda tidak bisa lagi mengakses setelah 2 jam. Untuk mematikan sepenuhnya, bisa dimatikan dari <em>task manager<\/em>, atau cukup\u00a0<em>restart\u00a0<\/em>komputer Anda.<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Dalam posting ini saya ingin menjelaskan koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC (dengan bantuan KepServerEx). Hampir 7 tahun yang lalu saya menulis posting serupa untuk PLC Siemens S7 200. Saat itu sebagai OPC client digunakan produk \\&#8221;OPC Link\\&#8221; yang saat ini sudah digantikan oleh \\&#8221;Factory Suite Gateway\\&#8221;. Berikut ini video yang &#8230; <a title=\"Koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC\" class=\"read-more\" href=\"https:\/\/www.akademiautomasi.com\/?p=1375\" aria-label=\"Read more about Koneksi Wonderware InTouch dengan PLC Siemens S7 1200 via OPC\">Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":1376,"comment_status":"open","ping_status":"open","sticky":false,"template":"single-with-sidebar","format":"standard","meta":{"_kadence_starter_templates_imported_post":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[39],"tags":[97,69,64,60],"class_list":["post-1375","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-scada-hmi-tutorial","tag-kepserverex","tag-opc","tag-plc-siemens","tag-wonderware-intouch"],"jetpack_featured_media_url":"https:\/\/www.akademiautomasi.com\/wp-content\/uploads\/2019\/05\/diagram-intouch-siemens.png","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/posts\/1375","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1375"}],"version-history":[{"count":0,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/posts\/1375\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=\/wp\/v2\/media\/1376"}],"wp:attachment":[{"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1375"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1375"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.akademiautomasi.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1375"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}